Orion-system GPC-XP Controller Manuale Utente Scaricare il pdf (Pagina 13)

GPC-XP Controller Technical Guide

Section 4: Conﬁ guring Analog Inputs

Analog Input Conﬁ guration Screen

Conﬁ guring Analog Inputs

Left-click in the data entry ﬁ eld in the Analog Inputs Window to

open the Analog Input Conﬁ guration Window (Figure 11 below).

The following conﬁ gurations are available for each Analog Input:

●

Not Used

●

Thermistor Fahrenheit Temperature: 10K Ohm Type III

Scaled for Fahrenheit. Set jumper to the appropriate setting

(Figure 2, page 6.)

●

Thermistor Celsius Temperature: 10K Ohm Type III

Scaled for Celsius. Set jumper to the appropriate setting

(Figure 2, page 6.)

●

4 - 20mA User Scaled: 4-20mA User-Scaled Sensor

●

0 - 5vdc or 0-10 vdc User Scaled: Select this option

if using a 0-5vdc or 10vdc scaled sensor. Set jumper

associated with this input to the appropriate 0-5v or 0-10v

setting (Figure 2, page 6.)

●

Wall Sensor Slide Offset: If using a WattMaster

thermistor space sensor with the slide adjust, this would be

the input conﬁ guration for the AUX connection from that

sensor.

●

Read Global Analog – Channel: See Figure 110, page

48 for an explanation of Analog Globals. Left or right click

on the Question mark beside Global Analog Help to access

information about the Global Broadcasts and to view pre-

deﬁ ned channels.

●

Communicating Temperature Sensor: If using a

WattMaster Communicating Temperature Sensor with a

modular cable, conﬁ gure this input to read the appropriate

Communicating Sensor Address. Enter an address from

1-8 in the < Communicating Sensor Address> ﬁ eld and

press <ENTER>. If using a combination Temperature and

Humidity Communicating Sensor, conﬁ gure one input to

read the temperature and another input to read the humidity,

both using the same Communicating Sensor address.*

●

Communicating Humidity Sensor: If using a

combination Temperature and Humidity Communicating

Sensor with a modular cable, conﬁ gure one input to read

the temperature and another input to read the humidity,

both using the same Communicating Sensor address. Enter

an address from 1-8 in the <Communicating Sensor

Address>

ﬁ eld and press <ENTER>.*

●

Communicating Carbon Dioxide Sensor: If using a

WattMaster Communicating CO

Sensor with a modular

cable, conﬁ gure this input to read the appropriate Comm-

unicating Sensor Address. Enter an address from 1-8 in

the <Communicating Sensor Address> ﬁ eld and press

<ENTER>.*

●

Communicating Combination Outdoor Air Temperature

and Humidity Sensor:

If using a WattMaster Comm-

unicating Combination Outdoor Air Temperature and

Humidity Sensor, conﬁ gure one input to read the temperature

and another input to read the humidity. For each input, enter

<25> as the Communicating Sensor Address. Only one of

these sensors can be used on a GPC-XP.

*NOTE: See the appropriate E-BUS Digital Room Sensor or

E-BUS Digital CO

Sensor Technical Guides for

information on how to address the communicating

sensors.

Figure 11: Analog Input Conﬁ guration Window

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 59 60

Commenti su questo manuale

Nessun commento

Orion-system GPC-XP Controller Manuale Utente Pagina 13

Commenti su questo manuale

Prodotti e manuali riguardandi Hardware Orion-system GPC-XP Controller